Mercedes S-class W202
1993-2000 of release
Repair and car operation
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
- 4. Greasing system
4.2. The engine oil specification
4.3. A scope of oils / a viscosity class
4.4. The oil expense
4.5. A contour of circulation of oil (ДД)
4.6. Oil редукционный the valve
+ 4.7. The oil pallet
4.8. The indicator of level of oil
4.9. The heat exchanger oil-/of a cooling liquid
4.10. Diagnostics of malfunctions in a contour of circulation of oil
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes
As scopes next SAE classes coincide, short-term fluctuations of temperature should not be considered. Is admissible to mix oils of various classes of viscosity if having added it is made once and the external temperature does not correspond to more class of viscosity of oil being in the engine.
For petrol engines of the S-class engine oils of API-specification SF and SG, and for the diesel engine – API-CD are suitable.
The European manufacturers of oil in addition set still the CCMC-specification which considers the European manufacturing techniques of engines and gets the increasing value. Oils for petrol engines in ССМС are designated from class G1 to G5.
For petrol engines firm Mercedes orders as the minimum standard ССМС-G4 for all-weather oils; ССМС-G5 concerns to легкотекучим to oils with low viscosity.
These standards approximately correspond to API-specification SG in addition meeting the European requirements.
For diesel engines of a class With engine oils of API-classification CE and CF-4, and for petrol – API-SF and SG are suitable.
Oils for petrol engines in ССМС are designated from class G1 to G5. Diesel oils for cars contain in specification ССМС – D4, D5 and high-quality specification ССМС-PD2, ССМС-D4 approximately corresponds API-CE; CCMC-D5 it is similar API-CF-4.
Use of engine oil ССМС-D4 suffices for normal operation of the car. High-quality oils of classes D5 and PD4 also can be used at any time. Use of standard oil ССМС of specification API CE and CF-4 is essentially necessary.
In each separate case be guided by a principle of use of the engine oil recommended by firm Mercedes-Benz (it is designated on the canister with oil).