Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
- 9. Transmission
   - 9.1.2. Check of a thickness of a disk of coupling in the mounted condition
      9.1.3. Coupling check
      9.1.4. The bearing муфты coupling deenergizings
      9.1.5. Removal of air from a control system of coupling
      9.1.6. Пробуксовочка
      9.1.7. Diagnostics of malfunctions of system of coupling
   + 9.2. Mechanical and automatic boxes of a gear change
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes







9.1.2. Check of a thickness of a disk of coupling in the mounted condition
THE GENERAL DATA

Coupling is self-adjustable system and does not demand maintenance service, therefore it is impossible to define deterioration of a disk of coupling on люфту coupling pedals. To check up a thickness of a disk of coupling in the mounted condition, the special control template which can be made independently is required.

PERFORMANCE ORDER
1. Make a control template of sheet metal in the thickness of 0,8 mm in scale 1:1.
2. Raise the car.
3. Insert a template (4) on the coupling switching centre against the stop into a groove of a plastic insert.
4. If the cut out marks of a template (marksman) roll behind a flange of the distributive cylinder of coupling the coupling disk still has a sufficient thickness.
5. If the cut out marks remain visible though the template is inserted against the stop in this case the coupling disk has already reached the limit of deterioration and should be replaced.
6. Lower the car.