Mercedes S-class W202

1993-2000 of release

Repair and car operation


Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
- 8. Fuel system
   + 8.1.1. Introduction
   - 8.2. System of injection of petrol engines
      8.2.1.1. A principle of work PMS
      8.2.1.2. A principle of work HFM
      8.2.2. Self-diagnosing of a condition of system of ignition and fuel injection
      8.2.3. Air flowmeter
      8.2.4. A temperature-sensitive element of a cooling liquid
      8.2.5. The gauge of soaked up air
      8.2.6. System of vacuum pipelines
      8.2.7. The fuel distributor with клапанными atomizers
      8.2.8. Klapannye atomizers
      8.2.9. The oxygen gauge (ljambda-probe)
      8.2.10. Diagnostics of malfunctions of system of injection of gasoline
      8.2.11. That it is necessary to know to the owner of the car with инжекторным the engine
      8.2.12. The Turbo-doctor
   + 8.3. System of injection and a food of diesel engines
   + 8.4. System of release of the fulfilled gases
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes












8.2.8. Klapannye atomizers
THE GENERAL DATA

Removal

PERFORMANCE ORDER
1. Remove the fuel distributor together with клапанными atomizers.
2. Remove stoppers of rotation (16/7) on клапанных atomizers.
3. Extend клапанные atomizers from the fuel distributor.

Installation

PERFORMANCE ORDER
1. Insert клапанные atomizers into the fuel distributor, preliminary slightly having greased sealing rings of round section (16/8) and (16/9).
2. Насаживайте rotation stoppers on клапанные atomizers so that they were fixed in a square ledge (marksman) on клапанной to an atomizer (Y62).
3. Establish the fuel distributor together with built in клапанными atomizers.