Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
- 3. Engines
   3.1.2. Identification number
   + 3.1.3. The engine
   3.1.4. Cars with the conditioner
   3.1.5. The bottom cover of a motor compartment
   3.1.6. Covers of cast apertures
   3.1.7. Натяжитель chains
   + 3.1.8. A cover of a head of the block of cylinders
   + 3.1.9. A head of the block of cylinders
   + 3.1.10. Camshafts
   3.1.11. Hydraulic тарельчатые pushers
   3.1.12. Maslootrazhatelnye caps
   3.1.13. Valves
   3.1.14. Directing valves
   3.1.15. Saddles of valves in a head of the block of cylinders
   3.1.16. A compression
   + 3.1.17. A klinovyj belt
   3.1.18. Diagnostics of malfunctions (DB)
   3.1.19. Broad-brush observations
   3.1.20. Repair work without engine dismantle
   + 3.1.21. Engine major repairs
   + 3.2. The diesel engine (ДД)
   3.2.3. Cars with the conditioner
   3.2.4. The bottom cover of a motor compartment
   3.2.5. Covers of cast apertures
   3.2.6. Натяжитель chains
   + 3.2.7. A camshaft
   + 3.2.8. A head of the block of cylinders
   + 3.2.9. Maslootrazhatelnye caps
   3.2.10. A cover of a head of the block of cylinders (2,2/2,5)
   3.2.11. Hydraulic тарельчатые pushers
   3.2.12. Valves
   3.2.13. Directing valves
   3.2.14. Saddles of valves in a head of the block of cylinders
   3.2.15. A head of the block of cylinders and the motor block
   3.2.16. A compression
   3.2.17. Клиновой a ridge belt
   3.2.18. The pulling device клинового a ridge belt
   3.2.19. Diagnostics of malfunctions (ДД)
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes







3.2.10. A cover of a head of the block of cylinders (2,2/2,5)
THE GENERAL DATA

The cover of a head of the block of cylinders acts in film, for example, for dismantling of atomizers, a camshaft or a head of the block of cylinders.

Removal


PERFORMANCE ORDER
1. Disconnect a wire of "weight" of the battery.
The prevention

The anticreeping code of radio is thus erased.


2. Remove a cross-section pipe of the air filter.
3. Remove the channel of wires on the engine (3).
4. Remove the top covering (4).
5. Unscrew system of exhaust ventilation of the engine (5) from a head of the block of cylinders and take elements of its connection. Thus do not bend air pipes.
6. Remove drain маслошланги from atomizers.
7. Unscrew bolts (6) covers of a head of the block of cylinders.
8. Uncover heads of the block of cylinders (7) with a sealing lining (8).

Installation

PERFORMANCE ORDER
1. Before installation of a cover of a head of the block of cylinders track correctness of landing (arrow) of plugs of a covering (1). Replace the damaged sealing rings.
2. Establish a cover of a head of the block of cylinders with a sealing lining and tighten with the moment 10 Н.м., i.e. Not so strongly. Replace the damaged sealing lining.
3. Connect pipelines of injection of fuel and drain маслошланги.
4. Connect and attach hoses of exhaust ventilation of the engine.
5. Establish a plastic covering and the channel of wires.
6. Establish a cross-section pipe of the air filter.
7. Connect a cable of weight of the battery (–).
8. Set an anticreeping code for radio.
9. Start the engine and check up on маслонепроницаемость.