Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
- 2. Maintenance service
   + 2.1.1. The engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   + 2.5. Works on maintenance service
   - 2.6. Care of the car
      2.6.2. Care of the painted surfaces
      2.6.3. Care of plastic details
      2.6.4. Care of glasses and rubber consolidations
      2.6.5. Care легкосплавными disks
      2.6.6. Seat belts
      2.6.7. Anticorrosive protection
      2.6.8. Preservation of a motor compartment
      2.6.9. Care of an upholstery of armchairs
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes







2.6.7. Anticorrosive protection
THE GENERAL DATA

All system of the bottom of a body, including back wheel niches, for the purpose of protection against corrosion is covered by a polyvinylchloride layer. Especially strongly dangerous areas in a zone of rotation of forward wheels are protected against rubble hit by plastic covers. Besides, details of a body subject to corrosion are made from high-strength or of the zinced sheet metal. Before approach of a cold season and after a sink of the bottom of a body it is necessary to check up its anticorrosive protection and if necessary to spend additional preservation. In centrifugal area of the basis of a body the dust, clay and sand can отлагаться. Removal of the collected dirt which during winter time can be enriched also with salt is especially important.