The tank with a brake liquid is located in a motor compartment. It is divided on two chambers, on one for each contour of a brake drive. The screw shutter has a ventilating aperture which should not be littered. The tank is transparent, so level of a brake liquid can be checked at any time outside. Expediently through regular time intervals to look at a tank. Liquid level at the closed cover should be between marks "max" and "min", squeezed out on a tank.
Fill in a brake liquid only specifications DOT 4.
Because of deterioration of brake disks there is an insignificant decrease in level of a brake liquid. It is considered the normal phenomenon.
But if during short time level of a brake liquid it is a sign of its leak strongly decreases.
In this case it is necessary to find out a leak place immediately. With a view of safety to check brake system follows in a specialised repair truck. |