Mercedes S-class W202

1993-2000 of release

Repair and car operation

Mercedes W202
+ 1.2. The general data
- 2. Maintenance service
   + 2.1.1. The engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance service
      - 2.5.1. The engine and system of release of the fulfilled gases
         + 2.5.1.1. Engine oil replacement
         2.5.1.2. Condition check клинового a belt
         2.5.1.3. Replacement of spark plugs
         2.5.1.4. Check of electric connections
         2.5.1.5. Greasing of a control system throttle заслонкой
         + 2.5.1.6. Check of level of a cooling liquid
         2.5.1.7. The conditioner: check of level of a coolant
         2.5.1.8. Replacement of the fuel filter / of the filter of rough clearing
         2.5.1.9. Replacement of a replaceable element воздушкого the filter
         2.5.1.10. Check of system of release of the fulfilled gases
      + 2.5.2. A box predach/the main transfer
      + 2.5.3. The forward bridge / a steering
      + 2.5.4. Tyre Brakes /
      + 2.5.5. The Body / internal illumination
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes

2.5.1.9. Replacement of a replaceable element воздушкого the filter

THE GENERAL DATA

For replacement it is not required any special tool.

It is necessary to buy the following quickly wearing out detail:
– A replaceable element of the air filter. At its purchase pay attention to conformity of capacity of the engine.

PERFORMANCE ORDER

1. Uncover the air filter. For this purpose open high-speed shutters (arrows).

2. Take filtering element. Thus take filtering element for paper folds without the punched sheet. Do not apply any tool.

3. Wipe the case of the filter a rag.

4. Insert a new filtering element into the case of the air filter. Sealing rubber should adjoin densely from different directions.

5. Check up consolidation on a cover of the air filter on absence of damages, if necessary – replace.

6. Spread a cover and latch high-speed shutters.