Mercedes S-class W202

1993-2000 of release

Repair and car operation

Mercedes W202
+ 1.2. The general data
- 2. Maintenance service
   + 2.1.1. The engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance service
      - 2.5.1. The engine and system of release of the fulfilled gases
         - Engine oil replacement
   Engine oil plums
   The visual control of leak of oil
   Check of level of oil Condition check клинового a belt Replacement of spark plugs Check of electric connections Greasing of a control system throttle заслонкой
         + Check of level of a cooling liquid The conditioner: check of level of a coolant Replacement of the fuel filter / of the filter of rough clearing Replacement of a replaceable element воздушкого the filter Check of system of release of the fulfilled gases
      + 2.5.2. A box predach/the main transfer
      + 2.5.3. The forward bridge / a steering
      + 2.5.4. Tyre Brakes /
      + 2.5.5. The Body / internal illumination
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes Check of level of oil

The prevention

The engine should not spend some oil more than 1,0 l for 1000 km of run. The bolshy expense is a deterioration sign маслоотражательных caps of cores of valves and / or piston rings or oil consolidations.

At measurement of level of oil the car should stand on a horizontal surface.

The engine should be heated-up to working temperature.

After a stop of the engine wait not less than 3 minutes that oil has gathered in the oil pallet.

1. Extend the index of level of oil (1) and wipe its pure rag.
2. Enter a measuring core against the stop into directing tube and again it extend. Oil level should be between both маркировочными marks.

The prevention

Add new oil only in the event that oil level comes nearer to a mark "min". The volume of oil from "min" to a mark "max" makes about 2,0 l.

Oil is added in a shutter (2) covers of a head of the block of cylinders. At доливке apply a corresponding grade of oil, do not apply oil additives.