Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
- 2. Maintenance service
   + 2.1.1. The engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance service
      - 2.5.1. The engine and system of release of the fulfilled gases
         - 2.5.1.1. Engine oil replacement
            2.5.1.1.1. Engine oil plums
            2.5.1.1.2. The visual control of leak of oil
            2.5.1.1.3. Check of level of oil
         2.5.1.2. Condition check клинового a belt
         2.5.1.3. Replacement of spark plugs
         2.5.1.4. Check of electric connections
         2.5.1.5. Greasing of a control system throttle заслонкой
         + 2.5.1.6. Check of level of a cooling liquid
         2.5.1.7. The conditioner: check of level of a coolant
         2.5.1.8. Replacement of the fuel filter / of the filter of rough clearing
         2.5.1.9. Replacement of a replaceable element воздушкого the filter
         2.5.1.10. Check of system of release of the fulfilled gases
      + 2.5.2. A box predach/the main transfer
      + 2.5.3. The forward bridge / a steering
      + 2.5.4. Tyre Brakes /
      + 2.5.5. The Body / internal illumination
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes







2.5.1.1.2. The visual control of leak of oil
PERFORMANCE ORDER
1. At the oiled engine at the high expense of oil check up, where oil follows.
1а. Open a cover маслоналивного apertures and check up consolidation on absence of porosity or damage.
1б. Ventilation system картера: for example, a ventilating hose from a cover of a head of the block of cylinders to the case throttle заслонки.
1в. Consolidation of a cover of a head of the block of cylinders.
1г. Consolidation of a head of the block of cylinders.
1д. Consolidation of the oil filter: a cover of the oil filter.
1е. A carving stopper маслосливного apertures (a sealing ring).
1ж. Consolidation of the oil pallet.
1з. Epiploons in front and behind a distributive and cranked shaft.
2. As in the presence of thinnesses in most cases oil is distributed on rather big surface of the engine, that, at first sight, it is impossible to define oil leak. By search it is expedient to arrive as follows.
2а. Wash out the engine. For this purpose sprinkle the engine standard низкотемпературным детергентом and after short-term endurance wash out a water stream. Preliminary close the generator a plastic cap.
2б. Pollinate известью or a powder of talc of a place of separation and consolidation outside on the engine.
2в. Check up oil level, if necessary add oil.
2г. Spend a trial trip. As oil at the hot engine becomes liquid and thanks to it will appear in points of leaks this trial trip should be spent on a piece about 30 km on high-speed highway more likely.
2д. Then the engine survey a lighting lamp, localise a leaky place and eliminate defect.