Mercedes S-class W202

1993-2000 of release

Repair and car operation


Mercedes W202
+ 1.2. The general data
- 2. Maintenance service
   + 2.1.1. The engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   + 2.5. Works on maintenance service
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes












2.10. The tools applied to maintenance service
THE GENERAL DATA


Expenses for tool acquisition completely justify in volume of repair work which should be spent on car Mercedes. Besides the basic equipment in any case it is recommended to get динамометрический a wrench. The good and reliable tool is offered firm Hazet. In the table tools with number of the order of firm Hazet are resulted.

№ on fig.
The tool № firms HAZET
1
Shock (pulse) винтоверт 2272
3
Screw-drivers for various screws 793/3
4
The stand for check of work of engine Bosch
5
Stroboscope for definition of the moment of ignition Bosch 1)
6
Диодная a control lamp
7
Measuring lamellar щуп 0,05–1,0 mm 2147
8
Pincers for removal of coupling springs brake колодок 797
9
Shock exhaust pincers for removal маслоотражательных caps 791-2
10
Rotary core for capture of safety locks of system of injection 4519-1
11
Chain cutting torch of the final pipeline
12
Storage денсиметр with a pipette 802-1
13
Pneumatic adapter for replacement маслоотражательных caps 3428
14
The hydraulic device for disembarkation of nuts 846-22
15
Key of the oil filter 2172
17
Set of face keys 2100/7R
18
Brush for clearing of poles and clips of the storage battery 802-4
19
The holder for grinding in of valves 795
20
The magnetic selector 1976
21
Dinamometrichesky wrench 20–200 Н.м. 6122-1СТ
22
Шабер for removal of the rests of consolidation on a head of the block of cylinders 824
23
File for a support of the disk wheel brake mechanism 1968-1
24
Шкворень the tjagovo-drawbar, diameter of 15-19 mm 2173/1
25
Stripper of tips of cross-section steering draught 779
26
Pincers for removal of isolation from wires 1862
27
Brass дорн
28
Brush from a steel wire for clearing of a support of the disk wheel brake mechanism 1968
31
Shplintovoj leading element for safety pins 748 Lgb-4
32
Shplintovoj leading element for hollow pins 748-Lgb-6
33
Компрессометр
34
Square adapter with 1/2 "on 1/4" 958-2
36
The device for расточки распорных bolts 845
37
The bilateral open closed wrench for накидных nuts of the pipeline of a brake drive 612S 9 х 11

38
The bilateral open closed wrench for extraction of contact safety locks of system of injection of fuel 6128 12 х 14
39
Shock stripper of levers of a screen wiper etc. 1966-5
Is not present on fig.
Candle key with directing 767 A Mgt-1

1) Only for petrol engines