Mercedes S-class W202

1993-2000 of release

Repair and car operation

Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
- 14. An electric equipment
   14.1.2. Measuring devices
   14.1.3. Technics of measurements
   14.1.4. Electric equipment checks
   14.1.5. A sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. The storage battery
   + 14.1.8. The generator
   + 14.1.9. A starter
   14.1.10. The traction relay
   + 14.1.11. Illumination system
   14.1.12. Devices
   14.1.13. The instrument panel
   14.1.14. Lamps накаливания on the panel of devices
   14.1.15. Light switch
   14.1.16. A radio receiver
   - 14.1.17. The aerial A telescope of the automatic aerial
   14.1.18. Dynamics
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Jets стеклоомывателя
   14.1.21. Washing atomizers of headlights
   14.1.22. A screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. "Галогенки"
+ 14.2. Electroschemes

14.1.17. The aerial

77, 78. Bolts

79. The top part of consolidation

80. The bottom part of consolidation

81. A high-frequency wire

82. An electric socket

М11. The automatic aerial


1. Disconnect from the plug of the storage battery a weight wire (–).
The prevention

The anticreeping code of radio is thus erased. Before a detachment of wires subsection 14.1.7 recommendations see.

2. Open a luggage carrier cover, release spring clips and Take a lateral covering.
3. Unscrew a wire for connection with the case together with a bolt (77).
4. Unscrew the aerial below on the holder (78) and Take it from below from the rubber plug in a wing. Disconnect from plugs an antenna wire (81) and if is available, a line of management (82).


1. Check up the rubber plug in a wing on absence of porosity or damage, if necessary replace it.
2. Enter the aerial from below and insert its spherical head into the bottom part of the plug.
3. Spread the top part of the plug and fix it in the bottom part.
4. Screw the aerial on the holder.
5. Screw on a body a wire for connection of the aerial with the car case.
6. Attach to the plug an antenna wire. In the presence of the aerial with remote control connect to the plug an electric line of management.
7. Spread and fix spring clips a lateral covering.
8. Attach to the plug of the storage battery a weight wire (–). Establish time for hours and program an anticreeping code for radio.