Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
+ 13. A body
- 14. An electric equipment
   14.1.2. Measuring devices
   14.1.3. Technics of measurements
   14.1.4. Electric equipment checks
   14.1.5. A sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. The storage battery
   + 14.1.8. The generator
   + 14.1.9. A starter
   14.1.10. The traction relay
   + 14.1.11. Illumination system
   14.1.12. Devices
   14.1.13. The instrument panel
   14.1.14. Lamps накаливания on the panel of devices
   14.1.15. Light switch
   14.1.16. A radio receiver
   + 14.1.17. The aerial
   14.1.18. Dynamics
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Jets стеклоомывателя
   14.1.21. Washing atomizers of headlights
   14.1.22. A screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. "Галогенки"
+ 14.2. Electroschemes







14.1.14. Lamps накаливания on the panel of devices
THE GENERAL DATA

А1. The combined device
е1. A signalling device of inclusion of indexes
The left turn
е2. A signalling device of inclusion of indexes
The right turn
е3. A signalling device of inclusion of indexes
Tail light
е4. An alarm lantern of the index
Fuel stock
е5. The control of a charge of the storage battery
е6. The control of deterioration of frictional overlays
Brake колодок
е7. The control of level of a brake liquid and lay
Brake system
е8. Illumination of a guard of devices
е9. An alarm lantern of seat belts
е11. The control of level of a cooling liquid
е12. The control of level of oil
е13. The water level control in a screen wiper
е14. The control of failure of lamps накаливания
е15. The control of an inflatable pillow of safety
е16. The control of a preliminary warming up
е17. The control противоблокировочного devices of brake system (ABS)
е21. Indication of functioning of system of regulation проскальзывания driving wheels concerning a basic surface (ASR)
е22. The control of system of regulation проскальзывания driving wheels concerning a basic surface (ASR)
е24. The control of automatic blocked differential (ASO)
е25. Indication of functioning of automatic blocked differential (ASD)
е26. The control of work of engine CHECK ENGINE
е34. Control EDC

PERFORMANCE ORDER
1. Remove the instrument panel.
2. If necessary remove cartridges of signalling devices on an underside by means of the left rotation and replace lamps. In repair trucks of firm Mercedes for отворачивания cartridges of lamps there is a special tool, but it can be executed also fingers or flat-nose pliers.
3. Replace a lamp only with a lamp having identical capacity and the same type.
4. Insert a cartridge of a lamp and wrap it to the right.
5. Mount the instrument panel.

THE SWITCH OF INDEXES OF TURN AND THE SCREEN WIPER SWITCH

Removal

31. Screws
32. The holder
33. A pipe-cover casing
S4х1. A shtekkernyj socket of the combined switch
S40х1. A shtekkernyj socket темпомата
S4. The combined switch
S40. The switch темпомата

PERFORMANCE ORDER
1. Remove a protective casing under a guard of devices.
2. Remove a steering wheel.
The prevention

Observe precaution rules at the reference with the device of an inflatable pillow of safety.


3. Unscrew screws from a contact spiral at directly established forward wheels so that it was possible to remove a contact spiral.

The prevention

Do not unscrew completely screws, otherwise a contact spiral collapses also it it will be necessary to establish again in average position.


4. Extend from the holder two штекерных connections of a contact spiral and separate them. Remove a contact spiral.
5. Unscrew fixing screws to the combined switch.
6. Take the holder.
7. Take штеккерное connection (S4x1) and by displacement бюгеля (marksman), deblock it.
8. Only at equipment темпоматом: Take and separate штеккерное connection (S40x1).
9. Take a casing of a pipe-cover (33) together with the combined switch, at necessity and the switch темпомата.

Installation

PERFORMANCE ORDER
1. Spread on a steering shaft the combined switch together with a pipe-cover.
2. Spread and screw the holder.
3. Lay connecting lines and fix tips of wires in return sequence.
4. Spread a contact spiral on a steering shaft, thus lay a connecting wire. Pay attention that a contact spiral насаживается against the stop and that the groove on a contact spiral coincides with a fixing ledge on a steering shaft. Tighten hardly fixing screws. Connect tips of wires and fix them.
5. Establish a protective casing under a guard of devices.
6. Establish a steering wheel.