|
1. Check up assembly position of glass at its easy opening. The backlash from above should be uniform, from below glass should enter into directing tyre, otherwise adjust. |
2. Remove an internal covering of a door. |
3. A germetizirujushchuju film in the bottom area cautiously remove.
The prevention The film is easily torn.
|
4. Glass of a door window lower downwards while the bolt is in an assembly aperture. Ослабьте a bolt, without turning off it. |
5. Insert from above glass into the back tyre of a window, simultaneously correct glass downwards or upwards, tighten a bolt. |
6. By means of the handle, lowering and lifting glass, check up ease of its moving. |
7. Attach without folds герметизирующую a film. Attention: the film should not be damaged and should provide faultless tightness. |
8. Establish an internal covering of a door. |