Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
- 13. A body
   13.2. A forward door
   13.3. A back door
   13.4. The handle of a forward door
   13.5. The handle of a back door
   13.6. A door-lock
   13.7. An internal covering of doors
   13.8. Forward стеклоподъемник
   13.9. Glass of a forward window
   13.10. Back стеклоподъемник
   13.11. Glass of a forward door
   13.12. The engine стеклоподъемника
   13.13. Perchatochnyj boxing
   13.14. A sheeting of the handle of a gear change
   13.15. A forward ashtray
   13.16. The average console
   13.17. The panel of service of heating
   13.18. An internal covering of the A-rack
   13.19. An internal covering of the S-rack
   13.20. A forward seat
   13.21. A back seat
   + 13.22. The central lock
   13.23. The external mirror / has flown down mirrors
   13.24. A covering under the instrument panel
   13.25. A forward bumper
   13.26. A back bumper
   13.27. An internal wing of the car
   13.28. A car wing
   13.29. A lattice of a radiator / emblem Mercedes
   13.30. Draught of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of giving of air for salon heating
   13.33. A catchment basin
   13.34. A paint and varnish covering
   13.35. Metal corrosion
   13.36. An automake-up
   13.37. What creaks?
   13.38. The hatch
+ 14. An electric equipment
+ 14.2. Electroschemes







13.8. Forward стеклоподъемник Removal

PERFORMANCE ORDER
1. Remove an internal covering of a door.
2. Cautiously remove герметизирующую a film. Be cautious: the film is easily torn.
3. Window glass lower as it is possible more low while the screw (2) will not appear in an assembly aperture. (3 – the tyre стеклоподъемника, 1 – glass.)
4. Unscrew the screw (2) in front on the tyre стеклоподъемника.
5. Slightly raise glass behind and Take crackers from the tyre стеклоподъемника.
6. Press glass upwards and insure him from loss by a plastic or wooden wedge.

7. Стеклоподъемник (4) приклепан. Drill 6 rivets (8) drill 4, 8 mm. Thus track, that the drill has not entered into an internal tin of a door. For заклепывания pincers are necessary for secret rivets.
8. Extend стеклоподъемник with the tyre and take downwards. Electric стеклоподъемник Take together with the engine. Disconnect a wire стеклоподъемника.

Installation

PERFORMANCE ORDER
1. Establish at a door стеклоподъемник and rivet by means of pincers for secret клепки. If is not present at the disposal of pincers it is possible to fix стеклоподъемник screws and nuts. Screws before a twisting cover with protective means, for example, Loctite 270 or Omnifit.
2. Cautiously lower glass and enter together with crackers from outside the lever стеклоподъемника into tyre cut стеклоподъемника.
3. Insert the forward lever стеклоподъемника into the tyre of the lift and screw, without tightening. The screw (2) is tightened only after the door window is adjusted.
4. Attach electric wires.
5. Adjust a door window.
6. Paste герметизирующую a film so that there were no folds.
The prevention

Do not damage a film – it should carry out hermetic sealing faultlessly.


7. Establish an internal covering of a door.