Mercedes S-class W202

1993-2000 of release

Repair and car operation

13.5. The handle of a back door

THE GENERAL DATA

The handle of a back door on a design is similar to the handle of a forward door, distinctions are more low specified first of all.

Removal

PERFORMANCE ORDER

1. Get a door sealant at height of a door-lock from a door groove. 2. Unscrew on 5 turns a bolt with internal шестигранником (marksman) a face key in the size of 3 mm through an aperture at doors. The bolt with internal шестигранником is accessible through an aperture (10) on the forward party of a door. 3. Extend back directing to a door at first back, and then outside. 4. Extend the handle of a door with a lining back from basic скобы. Basic скоба, if necessary, can be removed from the interior of a door. For this purpose, the truth, it is necessary to remove a door covering. 5. Remove rubber linings of the handle of a door.

Installation

PERFORMANCE ORDER

1. Insert the door handle with a lining and thus enter into the operating lever of a door-lock. 2. Establish the back directing. 3. Fix a door-lock a bolt with internal шестигранником. 4. Establish a sealant of a door and check door work.