Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
- 13. A body
   13.2. A forward door
   13.3. A back door
   13.4. The handle of a forward door
   13.5. The handle of a back door
   13.6. A door-lock
   13.7. An internal covering of doors
   13.8. Forward стеклоподъемник
   13.9. Glass of a forward window
   13.10. Back стеклоподъемник
   13.11. Glass of a forward door
   13.12. The engine стеклоподъемника
   13.13. Perchatochnyj boxing
   13.14. A sheeting of the handle of a gear change
   13.15. A forward ashtray
   13.16. The average console
   13.17. The panel of service of heating
   13.18. An internal covering of the A-rack
   13.19. An internal covering of the S-rack
   13.20. A forward seat
   13.21. A back seat
   + 13.22. The central lock
   13.23. The external mirror / has flown down mirrors
   13.24. A covering under the instrument panel
   13.25. A forward bumper
   13.26. A back bumper
   13.27. An internal wing of the car
   13.28. A car wing
   13.29. A lattice of a radiator / emblem Mercedes
   13.30. Draught of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of giving of air for salon heating
   13.33. A catchment basin
   13.34. A paint and varnish covering
   13.35. Metal corrosion
   13.36. An automake-up
   13.37. What creaks?
   13.38. The hatch
+ 14. An electric equipment
+ 14.2. Electroschemes







13.4. The handle of a forward door
THE GENERAL DATA

1. The door handle
2. Directing the lock cylinder
3. A rotary core
4. A lining
5. A lining
6. A bolt with internal шестигранником 4 mm
7. Keeping скоба for a bolt
8. Basic скоба
9. Screws

Removal

PERFORMANCE ORDER
1. Get a door sealant at height of a door-lock of a groove of a door.
2. Turn off approximately on 4 turns a bolt with internal шестигранником (6) by means of 4 mm of a face key through an aperture at doors. The bolt with internal шестигранником is insured against drop - out by the holder (7).
3. Directing (2) extend at first back, and then outside.
4. Extend the door handle (1) with a lining (4) back from basic скобы and remove. Basic скоба can be, in case of need, it is removed from the interior of a door, but for this purpose it is necessary to remove a door covering.
5. Remove a lining (5).

Installation

Door-lock

2 – directing the lock cylinder
3 – a rotary core
10 – эксцентриковый the adjusting screw
11 – a door-lock
12 – the operating lever

11 – a door-lock
13 – an aperture under эксцентриковый the adjusting screw
14 – an aperture under the screw with internal шестигранником

PERFORMANCE ORDER
1. Establish эксцентриковый regulating screw (10) outside thanks to what the door handle is easier mounted.
2. Establish the door handle with a lining and thus enter into the operating lever (12) door-locks.
3. Behind insert directing the cylinder of the lock (2) and also enter a rotary core (3) into management of a door-lock.
4. Fix a door-lock a bolt with internal шестигранником.
5. Adjust with the help эксцентрикового the screw (10) backlash between the handle (1) and operating lever (12) crosswise screw-driver through an aperture (13) on the forward party of a door. The backlash should make from 1 to 3 mm.
6. Insert a sealant of a door and check door work.