Mercedes S-class W202

1993-2000 of release

Repair and car operation

Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
- 13. A body
   13.2. A forward door
   13.3. A back door
   13.4. The handle of a forward door
   13.5. The handle of a back door
   13.6. A door-lock
   13.7. An internal covering of doors
   13.8. Forward стеклоподъемник
   13.9. Glass of a forward window
   13.10. Back стеклоподъемник
   13.11. Glass of a forward door
   13.12. The engine стеклоподъемника
   13.13. Perchatochnyj boxing
   13.14. A sheeting of the handle of a gear change
   13.15. A forward ashtray
   13.16. The average console
   13.17. The panel of service of heating
   13.18. An internal covering of the A-rack
   13.19. An internal covering of the S-rack
   13.20. A forward seat
   13.21. A back seat
   + 13.22. The central lock
   13.23. The external mirror / has flown down mirrors
   13.24. A covering under the instrument panel
   13.25. A forward bumper
   13.26. A back bumper
   13.27. An internal wing of the car
   13.28. A car wing
   13.29. A lattice of a radiator / emblem Mercedes
   13.30. Draught of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of giving of air for salon heating
   13.33. A catchment basin
   13.34. A paint and varnish covering
   13.35. Metal corrosion
   13.36. An automake-up
   13.37. What creaks?
   13.38. The hatch
+ 14. An electric equipment
+ 14.2. Electroschemes

13.28. A car wing Removal

1. Remove a forward bumper.
2. Remove lanterns of indexes of turn.
3. Remove an internal wing.
4. Remove decorative laths (молдинги) hands or wring out wide plastic шпателем.
5. Open a door and unscrew back bolts of a wing of the car.

The prevention

Thus paste over with a gluing tape a door in working area not to damage a varnish covering.

6. Unscrew a wing from below.
7. Unscrew a wing from above (five bolts) and from below in the field of a bumper.
8. Unscrew two bolts in cut for turn indexes.
9. Unscrew bolts on бленде below a headlight and remove бленду.
10. Extend a wing forward and remove it.


1. Cover a car wing from within with enough of protective greasing for the bottom.
2. Establish and level a wing. The wing should be flush with the closed forward door or to be above a maximum on 1 the Backlash between a wing and the closed cowl of the engine see, and also a forward door it is necessary to check up.
3. Screw all bolts of fastening and smoothly tighten.
4. Once again check up position of a wing of the car.
5. Preserve a cavity over an internal wing wax through cut of indexes of turn.
The prevention

Aperture from above in a wing before wax drawing to paste over with a sticky tape. After drawing of wax a tape to remove.

6. Establish a bumper.
7. Establish an internal wing.
8. Mount the blinking index of turn.
9. Fix decorative laths.