Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
- 13. A body
   13.2. A forward door
   13.3. A back door
   13.4. The handle of a forward door
   13.5. The handle of a back door
   13.6. A door-lock
   13.7. An internal covering of doors
   13.8. Forward стеклоподъемник
   13.9. Glass of a forward window
   13.10. Back стеклоподъемник
   13.11. Glass of a forward door
   13.12. The engine стеклоподъемника
   13.13. Perchatochnyj boxing
   13.14. A sheeting of the handle of a gear change
   13.15. A forward ashtray
   13.16. The average console
   13.17. The panel of service of heating
   13.18. An internal covering of the A-rack
   13.19. An internal covering of the S-rack
   13.20. A forward seat
   13.21. A back seat
   + 13.22. The central lock
   13.23. The external mirror / has flown down mirrors
   13.24. A covering under the instrument panel
   13.25. A forward bumper
   13.26. A back bumper
   13.27. An internal wing of the car
   13.28. A car wing
   13.29. A lattice of a radiator / emblem Mercedes
   13.30. Draught of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of giving of air for salon heating
   13.33. A catchment basin
   13.34. A paint and varnish covering
   13.35. Metal corrosion
   13.36. An automake-up
   13.37. What creaks?
   13.38. The hatch
+ 14. An electric equipment
+ 14.2. Electroschemes











13.19. An internal covering of the S-rack
THE GENERAL DATA

1. A covering
2. Hooks
3. Keeping clips
4. A plug-in clip
5. A shelf for hats
6. A bolt
7. A detail of fastening of a seat belt

Removal

PERFORMANCE ORDER
1. Disconnect regional protection in area обливки (1).
2. Wring out a plastic clip two hooks (3) from keeping clips.
3. Wring out a covering (1) of back top keeping clips for what press a covering to the middle.
4. Take a covering (1) forward from a plug-in clip (4) and uvulas (arrow) in a regiment for hats. If dismantle of all covering completely is necessary, in addition remove a back bench.
5. Unscrew a bolt (6) of a detail of fastening of a back seat belt (7) and extend a belt from a covering.

Installation

PERFORMANCE ORDER
1. Lay a tape of a seat belt and tighten with the moment 35 Н.м. A bolt in an element of fastening of a belt.
2. The further installation occurs in an order, the return to removal.