Mercedes S-class W202

1993-2000 of release

Repair and car operation


Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
- 13. A body
   13.2. A forward door
   13.3. A back door
   13.4. The handle of a forward door
   13.5. The handle of a back door
   13.6. A door-lock
   13.7. An internal covering of doors
   13.8. Forward стеклоподъемник
   13.9. Glass of a forward window
   13.10. Back стеклоподъемник
   13.11. Glass of a forward door
   13.12. The engine стеклоподъемника
   13.13. Perchatochnyj boxing
   13.14. A sheeting of the handle of a gear change
   13.15. A forward ashtray
   13.16. The average console
   13.17. The panel of service of heating
   13.18. An internal covering of the A-rack
   13.19. An internal covering of the S-rack
   13.20. A forward seat
   13.21. A back seat
   + 13.22. The central lock
   13.23. The external mirror / has flown down mirrors
   13.24. A covering under the instrument panel
   13.25. A forward bumper
   13.26. A back bumper
   13.27. An internal wing of the car
   13.28. A car wing
   13.29. A lattice of a radiator / emblem Mercedes
   13.30. Draught of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of giving of air for salon heating
   13.33. A catchment basin
   13.34. A paint and varnish covering
   13.35. Metal corrosion
   13.36. An automake-up
   13.37. What creaks?
   13.38. The hatch
+ 14. An electric equipment
+ 14.2. Electroschemes











13.12. The engine стеклоподъемника Removal

PERFORMANCE ORDER
1. Remove an internal covering of a door.
2. Cautiously remove герметизирующую a film in the bottom area.
The prevention

The film is easily torn.

3. Disconnect штеккер (2) from the engine стеклоподъемника.
4. A forward door: unscrew the engine стеклоподъемника (М10/3) with internal bolts (1) and remove.
5. A back door: dismantle стеклоподъемник, see соотв. Section. Then unscrew the engine стеклоподъемника (М10/5) with internal bolts (1) and remove.

Installation

PERFORMANCE ORDER
1. Before installation slightly grease with universal greasing an engine gear wheel.
2. Establish the engine and tighten bolts with the moment 15 Н.м.
3. A back door: establish стеклоподъемник.
4. Put on a wire socket.
5. Attach герметизирующую a film without folds.
The prevention

Do not damage a film – it should provide faultless hermetic sealing.
6. Check up functioning стеклоподъемника.
7. Establish an internal covering of a door.