Mercedes S-class W202

1993-2000 of release

Repair and car operation

Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
+ 12. Brake system
- 13. A body
   13.2. A forward door
   13.3. A back door
   13.4. The handle of a forward door
   13.5. The handle of a back door
   13.6. A door-lock
   13.7. An internal covering of doors
   13.8. Forward стеклоподъемник
   13.9. Glass of a forward window
   13.10. Back стеклоподъемник
   13.11. Glass of a forward door
   13.12. The engine стеклоподъемника
   13.13. Perchatochnyj boxing
   13.14. A sheeting of the handle of a gear change
   13.15. A forward ashtray
   13.16. The average console
   13.17. The panel of service of heating
   13.18. An internal covering of the A-rack
   13.19. An internal covering of the S-rack
   13.20. A forward seat
   13.21. A back seat
   + 13.22. The central lock
   13.23. The external mirror / has flown down mirrors
   13.24. A covering under the instrument panel
   13.25. A forward bumper
   13.26. A back bumper
   13.27. An internal wing of the car
   13.28. A car wing
   13.29. A lattice of a radiator / emblem Mercedes
   13.30. Draught of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of giving of air for salon heating
   13.33. A catchment basin
   13.34. A paint and varnish covering
   13.35. Metal corrosion
   13.36. An automake-up
   13.37. What creaks?
   13.38. The hatch
+ 14. An electric equipment
+ 14.2. Electroschemes

13.11. Glass of a forward door

The prevention

Some instructions on work are in more details stated in subsection 13.8., therefore we recommend to re-read this section. For a window of a back door operate with appropriate amount.


1. Remove an internal covering of a door.
2. Cautiously remove герметизирующую a film in the bottom area.
The prevention

The film is easily torn.

3. Glass completely lower downwards.
4. Wring out upwards the internal sealing tyre of a window from a doorframe a wide plastic wedge. Thus arrange an assembly wedge probably more close to keeping clips. Clips remain on a door.
5. In the same way wring out the external sealing tyre окна.17. A window slightly Raise upwards. Turn off in front a nut from the tyre стеклоподъемника and disconnect the lever стеклоподъемника.
6. Take glass, rejecting forward, upwards from a doorway.


1. Insert glass from above into a doorway and cautiously lower downwards.
2. Advance glass from below upwards and insert into directing tyre and crackers.
3. Insert the forward lever стеклоподъемника into the elevating tyre and screw up, without tightening. The nut is tightened only after adjustment of glass of a door.
4. Insert sealing tyres in front into a doorframe.
5. Adjust door glass.
6. Attach герметизирующую a film, having tracked, that there were no folds.
The prevention

Do not damage a film – it should provide faultless hermetic sealing.

7. Establish an internal covering of a door.