|
THE REASON
|
WAY OF ELIMINATION
|
|
Too big single way of a brake pedal
|
Frictional overlays are in full or in part worn out
| Replace brake frictional overlays. |
| Failure of one of contours of braking | Check up braking contours on leak of a brake liquid. |
|
The brake pedal far leaves by pressing and springs
|
| Air in brake system | Remove air from brakes. |
| Not enough a brake liquid in a levelling tank | Add a new brake liquid. |
| Фрикционнные brake overlays are behind worn strongly out, the payment of the basis of an overlay adjoins to a spring | Replace frictional overlays. Use firm frictional overlays. |
| Production of steam. Occurs at strong loading, for example, at driving on pass | Replace a brake liquid. Remove air from brakes. |
|
Slajuoe action of brakes, brake pedal should be pressed to the full
|
| Негерметичность the pipeline | Tighten elements of joining of the pipeline or replace it. |
| Damage of a cuff to the main or wheel brake cylinder | Replace a cuff. At damage of a cuff to the main cylinder replace internal details or the cylinder. |
| Damage of a stationary rubber lining | Repair a support. |
|
Bad brake effect, despite strong pressing a brake pedal
|
| Frictional overlays are oiled | Replace frictional overlays. |
| The unsuitable or hardened frictional overlay | Replace frictional overlays. Use only firm frictional overlays. |
| The braking amplifier is faulty | Check up усилительторможения. |
| Piston jamming | Provide a support free wheeling. |
| Pollution of hydraulic system | Clear, replace a brake liquid. |
| Frictional overlays are worn out | Replace frictional overlays. |
|
Brakes creak
|
| Frictional overlays are worn out | Replace frictional overlays. |
| The consequence of atmospheric influences (humidity of air) is frequent | It is not required any actions if the scratch is observed after long parking of the car at high humidity and after the first braking does not repeat. |
| Unsuitable frictional overlay | Replace frictional overlays. Use firm frictional overlays. Cover the basis of an overlay with paste an anti-scratch. |
| The brake disk rotates непараллельно to a support | Check up a surface прилегания a support. |
| The polluted wells in a support | Clean support wells. |
| Wrong installation of pistons in supports of back wheels | Check up 20-degree installation of pistons. |
|
Brakes are blocked at easy braking
|
| Frictional overlays are not oiled | Replace frictional overlays. |
|
The brake is tightened spontaneously
|
| The compensatory aperture in the main brake cylinder is littered | Clean the main brake cylinder and replace internal details. |
| Too small backlash between operating bar and the piston of the main brake cylinder | Check up a backlash (work in repair shop). |
|
Frictional overlays do not separate from a brake disk, wheels hard turn a hand
|
| Corrosion in cylinders of supports | Repair a support, in case of need – replace. |
|
Non-uniform deterioration of overlays
|
| Unsuitable frictional overlay | Replace brake overlays. Use firm frictional overlays. |
| The support is polluted | Clean support wells. |
| Hard piston stroke | Check up piston installation. |
| Негерметичность brake system | Check up tightness of brake system. |
|
Pulsation of a brake pedal
|
| Too big admission on a thickness or lateral palpation of a brake disk | Check up palpation and the admission. Finish a brake disk or replace. |
| The brake disk rotates not in parallel a support | Check up a surface прилегания a support. |
| Functioning of antiblocking system ABS | The normal phenomenon does not demand any actions, |
|
Vibration of brakes
|
| Unsuitable frictional overlay | Replace frictional overlays. Use only firm frictional overlays. |
| Partial corrosion of a brake disk | Cautiously smooth out a disk grinding колодкой. |
| Lateral palpation of a brake disk | Finish or replace a brake disk. |
|
The brake pedal slowly falls by easy pressing
|
| Malfunction of the main brake cylinder | Replace the main brake cylinder. |
|
Unilateral action of brakes
|
| Pressure of air in tyres does not correspond to the ordered | Check up pressure of air in tyres and correct. |
| Non-uniformity of deterioration of tyres | Replace the worn out tyres. |
| Frictional overlays are oiled | Replace frictional overlays. |
| Malfunction of a suspension bracket of a wheel or steering | Check up |
| Razlinye types of overlays on one axis | Replace frictional overlays. Use firm overlays. |
| Bad contact of frictional overlays | Replace frictional overlays. |
| The pipeline is littered | Check up brake pressure of all four brakes. |
| The polluted wells of a support | Clean a surface of landing and directing surfaces of frictional overlays in a support. |
| Corrosion in support cylinders | Replace a support. |
| Non-uniform deterioration of frictional overlays | Replace frictional overlays (both wheels). |
|
Brakes heat up in the course of movement
|
| The compensatory aperture in the main brake cylinder is littered | Clean the main brake cylinder and replace internal details. |
| Unsatisfactory idling of a pusher of the main brake cylinder | Check up presence of a sufficient backlash between a pedal and a pusher and, in case of need, adjust. |
| Jamming of the brake piston or it тугоподвижность | Restore passableness. |
| The brake pipeline is littered | Clean трубопороводы, replace a brake liquid. |
| Wrong adjustment of a lay brake | Correctly adjust. |