Mercedes S-class W202

1993-2000 of release

Repair and car operation



Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. A running gear
+ 11. A steering
- 12. Brake system
   12.2. Antiblocking system – ABS
   12.3. The additional equipment – system ASR
   12.4. Specifications of brake system
   12.5. Overlays of lobbies brake колодок
   + 12.6. Overlays of back disk brakes
   12.7. A support
   12.8. A forward brake disk
   12.9. A back brake disk
   12.10. A brake liquid
   12.11. Removal of air from brake system
   12.12. Brake pipelines / hoses
   12.13. Replacement of brake highways
   12.14. Brake колодки a lay brake
   12.15. Adjustment of a lay brake
   12.16. The stoplight switch
   12.17. Diagnostics of malfunctions of brakes
   + 12.18. Wheels and tyres
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes







12.16. The stoplight switch
THE GENERAL DATA

The stoplight switch is from above a brake pedal at the pedal block.

24. A brake pedal
S9. The stoplight switch

Removal

PERFORMANCE ORDER
1. Switch off ignition.
2. Remove the left covering under the instrument panel.
3. Disconnect штеккер wires from the stoplight switch.
4. Press a clamp (S9b), turn the switch and take.

Installation

PERFORMANCE ORDER
1. Extend against the stop a switching pin (S9a) on the new switch. The maximum way of a pin () thus turns out.
2. Completely press a brake pedal. Establish the switch and turn so that the clamp (S9b) has entered into gearing.
3. Release a brake pedal, thus саморегулируется a way of a pin of the switch.
4. Put on штеккер wires the stoplight switch.
5. Establish a covering under the instrument panel.
6. Check up, whether stoplights light up by small pressing a brake pedal.
The prevention

Check up the stoplight switch.