Mercedes S-class W202

1993-2000 of release

Repair and car operation


Mercedes W202
+ 1.2. The general data
+ 2. Maintenance service
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
- 10. A running gear
   + 10.1.2. Shock-absorbers
   + 10.1.3. Forward springs
   10.1.4. The stabilizer of cross-section stability
   + 10.2. The back bridge
   10.3. What for the shock-absorber is necessary
   10.4. Types of shock-absorbers
   10.5. Additional protection of spherical hinges of steering draughts
   10.6. "Artful" bolts and nuts
+ 11. A steering
+ 12. Brake system
+ 13. A body
+ 14. An electric equipment
+ 14.2. Electroschemes







10.1.4. The stabilizer of cross-section stability Removal

PERFORMANCE ORDER
1. Put the car in front on supports.
2. Unscrew from both parties of a support (22b) on the bottom and on suspension bracket levers. Preliminary mark with a paint position of collars for installation.
3. Remove the stabilizer together with rubber support.

Installation

PERFORMANCE ORDER
1. Before installation check up rubber support, porous or cracked - replace.
2. Put collars of rubber support in the same position, as well as before removal, and fix new самоконтрящимися bolts (22с) with the moment 20 Н.м.